Rss

Archives for : Android

location.location.location

Most of the time when services want to know your location, a post code and house number will suffice. For others, your longitude and latitude are necessary. From online shopping to GPS, so much depends on letting others know where you are.

Knowing where you are these days is, for the most part, very simple. Most of us carry a smartphone. GPS has been part of smartphones since the days of the Nokia N95, but it’s far more accurate these days and the software has come on leaps and bounds. While Google Latitude is no longer an option, others have stepped in. Glympse is by far my favourite for sharing my location on the fly. It tracks the phone or tablet and shares your location using a one-off web address to whoever you want to share it with, and only them. It automatically terminates the web page when you reach your destination, after a preset time, or by both (whichever comes first). When it comes to sharing your location it’s great, assuming you’re on the move.

When you’re not on the move and want to share a specific place, you’ll likely fall back to either an address, or longitude and latitude. I could say I’m at Tower Knowe Visitors Centre, Kielder, NE48 1BX and you could find me fairly easily. If I said I was parked at 55.1739, -2.4746 then you’d have a more accurate position, but postcodes only work if there’s a building nearby and long/lat can be easily mistaken or forgotten. What we need is a more elegant, simpler approach. Thankfully someone’s already solved that problem.

Imagine if everywhere on the planet, city, homes, seas or deserts could be found using just three words. Everywhere. Three words to describe every three by three metre square. Texting someone would be far simpler. Calling 999 for emergency services, or roadside assistance (AA, RAC, Green Flag etc) could be far less stressful by giving them positions.dreaming.nipping rather than spelling out Knowe and Kielder. It’s not hard to get the location from the three words either. Prefix the three words with what3words.com/ or easier still, w3w.co/ and you have your location. w3w.co/positions.dreaming.nipping will take you to the Tower Knowe car park at Kielder Forest.

With a range of map overlay options compatible with various browsers and apps for Android and iOS, it strikes me that the obvious choice for sharing your location is no longer street names or the more traditional “turn left at the Red Lion”. The app doesn’t even need an internet connection, it can provide your three word location and can even show direction and distance to a three word pin or waymarker (think geocaching). I’ve been using What3Words for a few years now, and we still add it for delivery instructions to indicate the right house, or for the front or back door. I’ve converted w3w addresses to QR codes and João Dias has added W3W’s Developer’s API to AutoTools so now a secret phrase can be sent to my phone and it will automatically reply with a link to my location. To date we’ve used W3W for everything from ‘additional instructions for the driver’ to the traditional treasure hunt for our son at Christmas and even our wedding invitations.

One thing is for certain, Ozero Kovdozero, Republic of Karelia, Russia or 63.1539N, 32.1040E aren’t remotely as easy to remember as w3w.co/location.location.location.

Encryptr

Every now and then something comes along where you can see somebody’s put some serious thought in to what they’re designing. The Raspberry Pi is probably the first thing that comes to mind, the Pebble watch is another. Lego is a brilliant example.

With apps, it’s lesser so. Not because people don’t think about what they’re doing, but because there are so many out there that are either sloppy/lazy, through no fault of their own the developers don’t have the experience, or because they’re looking at a means of making money (adverts, data theft etc.). Some apps really do shine through though, Tasker, AutoRemote, Titanium Backup, Spideroak. [See an early list]

Latest to the list must be Encryptr. Like Spideroak, at its core it is built on the ZeroKnowledge principle. This got Spideroak some criticism because with ZeroKnowledge systems, only the end user (that’s you) can read what’s stored. Not GHCQ, not David Bloody Cameron, not the FBI, not even Spideroak themselves. All associated data is encrypted and can only be decrypted with a passcode, password, phrase, or similar.

For a little while now (since Dropbox was hacked for the second time) I’ve been looking for something that uses Spideroak’s approach, end point decryption for keeping passwords secure. After a quick search I decided the best way was to use Spideroak’s Hive. Spideroak has a couple of options, data is stored per machine or shared with all machines signed in to that account. Hive is the latter, so my passwords are securely synced with every machine I choose to sign in with. It meant that if I didn’t have a phone signal I was a bit stuck, but only passwords for internet based systems were being stored. It also meant that I had to be at a PC to create the file but Spideroak are currently looking to implement this as an option in an upcoming release.

Encryptr is the solution to the problem. It doesn’t matter if your phone gets lost, stolen, soaked or damaged because no data is stored on your phone. Every password, PIN, credit card number and note that’s stored is done so securely online. With cross platform availability, the same passwords on your phone can be synced with your Windows or Linux PC or even your Mac. It even offers a secure, randomly generated password for you when you input an entry. Best of all, it’s free. There’s no advertising, no sign up, no personal details required to use it, just a user name and a passphrase/password. That’s it.

As Encryptr’s web site states, there’s a down side. If you forget your username and/or passphrase you’re locked out. No ‘forgot my password’ option as they don’t ask for your email address. Taking this into account, you have to acknowledge the advantages far outweigh any risk of forgetting your username and passphrase.

Encryptr’s developers have obviously thought about what they’re doing. While basic, the app and its ethos have a solid foundation. I’d like to be able to put entries in folders, toggle the courtesy password on/off and select its length and complexity (upper/lower case, numbers, symbols etc) and be able to copy the password in to the clipboard, but these are suggestions for a later version.

Considering the app is only at version 1.1.0, what Encryptr have achieved is impressive.

 

Pain Diary

I recently had the opportunity to answer questions about pain management and wearables.  Even if you’re unfamiliar with the phrase, I suspect most people are aware of the products.

Wearables are smart devices that are worn; fitness trackers, smart watches, health trackers etc. I’m not sure if those Bluetooth pills that are swallowed and feed back to a smartphone are strictly classified as wearable, but their benefits are definitely there.  Real time data is big business, and there are companies all over the world looking to cash in.  While many of those companies are profit based, some are more altruistic.  I certainly don’t have their budget but I wonder if the limited consumer gadgets I own could be put to use?

I’ve suffered with pain in my left knee after a road accident in 2007, pain in my lower back since around ’96 and my shoulder has dislocated at least since ’91.  I’d love to be able to walk, but the consultant at the Pain Clinic has told me it will never happen.  I’m taking it with a pinch of salt.  In 1974 my parents were told I wouldn’t survive the week.  I may be completely in denial, but I’d like to think that when it comes to medicine we can’t say never.  Putting aside the progress that’s being made in exoskeletons, I think the odds are against me but if I can help the medical profession find a trend then I’m going to do all I can.

Tasker already manages my medicines for me, announcing when they should be taken and nagging me if I’ve been unable to take them at a given time.  Tasker also allows me to manually record entries to my Pain Diary.  The entries update a text file (chosen for universal compatibility) via Dropbox, and also a privately shared Google calendar (accessible only via a private link). When combined with AutoPebble, medication notices can be pushed to the watch and actions taken.  I can notify Tasker that I’ve taken my meds, or to dismiss the alert and remind me later.  It also allows me to update my Pain Diary, all without taking my phone from my pocket.

Although the Pebble smart watch is renowned for its battery life, usually lasting 6 – 8 days, I’m not relying exclusively on it.  Using Tasker’s Scene functionality I can also have buttons pop up and update the Pain Diary straight from the phone’s home screen.  Because of the way Tasker works, that screen and all associated settings can be taken to a tablet or an upgraded phone in a couple of minutes.

Because of the way it’s set up I can add or remove items in the list very quickly. I can also type in rarer entries manually.  It has only really benefited me properly a couple of times, but those times have been worth it.  When a nurse asked how often I experience chest pains I was able to provide exact times and dates in a couple of minutes.

Obviously, this doesn’t have anywhere near the sophistication of what is achievable or even what’s currently in development. It has to be manually selected and doesn’t include heart rate, blood pressure, etc. but that’s not what I’ve set out to do. This started as a means for me to keep a personal record of when I’m in the most pain.  Providing the Pain Clinic with the entries is just an added bonus.

Lifeproof

It surprises me that more phones haven’t been waterproofed. A few years ago, Jason Bradbury featured a Samsung Galaxy S2 being submerged in water without any adverse effects after being coated with a nano-coating by P2i. Nowadays, a few phones will claim to be splashproof, but currently only Sony make fully waterproof phones. Despite the obvious appeal of a naturally submersible phone, I really don’t want a Sony product again.

There have been a few cases on the market to protect your phone. When the Lifeproof case was on special offer, I seized the opportunity. Lifeproof has a great reputation. I’ve seen their products for iPhones in the past but this was not only a Lifeproof case for an Android device, but for the same one I use. At least for now.

When you first pick up the box you immediately feel as though Lifeproof have given thought to their product. The box is tactile, a door on the front opens to let you view the product through the transparency. What impressed me was the magnets (top and bottom) which snap the door shut.

Lifeproof cover and test unitLifeproof internal sealThe rear of the box boasts the case will protect your phone with a rating of IP68. It can be fully submerged up to 6½ feet. Unfortunately, I can’t say I hold much confidence in this claim.

Lifeproof base, showing waterLifeproof include a phone’s “test unit”, a blue plastic mock up matching the dimensions of the phone it’s designed to protect. The manual suggests testing the case using the test unit for 30 minutes, weighted down to fully submerge it in water. I
tested it for 15 minutes using their test unit and found the product leaking water.

Lifeproof base, wet lockThe case was dried off, checked for anything that could be preventing the Lifeproof case from working properly. I could see nothing that would cause the leak.
The second test lasted only 5 minutes. Unfortunately the case was unable to resist the water using the provided test unit.

Another check for any dust, dirt, cracks in the rubber, anything at all proved fruitless. I checked and double
checked the test unit. Even under a jeweller’s magnifying glass nothing showed that could account for the leaks. To say it came as a disappointment was an understatement.

The final test was done under full observation in the hope the source may be found. No such luck. There was no obvious point where air could be seen escaping. After ten minutes it was clear that nothing would give away the weak point. With some surprise I learned the third test was successful.

I’m aware the only consistent factors in these tests have been the same case, the same test unit and the same person. Being truly objective, I cannot rule out me missing something between tests, however small. To the best of my knowledge, in each test nothing had changed. The test unit was settled in place. The case was snapped shut with the same force as before. Even the order of it closing matched the previous tests.

Pros: The Lifeproof case is sturdy. It feels like a quality product. The rubber on its back makes gripping it very easy. Despite only having contact with surfaces with its four rubber feet it doesn’t easily slide (tested at various angles). The speaker and microphone aren’t obstructed due to a waterproof membrane, music can be heard as before and nobody called knew the phone was in a case. Rubber covers over the buttons stand out proud from the base making finding them easy, but prevent the phone activating without your knowledge.

Cons: Some charging cables no longer work due to the smaller aperture at the base (see yellow plug on the case). None of the OTG cable fits. Only a third of the tests with the test unit passed being submerged in water.

Outcome: The Lifeproof case tested with the Samsung I9305 feels like a quality product. Even the box has had serious thought put in to it. The case will block dust, dirt, sand etc. (involuntary test) with ease.  [You’ll understand me not testing the waterproofing with the phone.]  Using the official cables and not cheap ones from eBay, the phone performs exactly as it always has.  Bumps and drops on to hard floor tiles are taken in its stride.

I’d recommend Lifeproof cases to anyone who asks. Cheap cases may save your phone from knocks and drops, but they can’t offer anything like the protection of a Lifeproof case.

Pebble throwing

I won’t go in to the details twice, but I had one requirement in a smartwatch – it had to interact with Tasker.

It turns out that Pebble themselves have decided on our behalf to stop supporting certain apps.  My needs in a smartwatch are few but supporting Tasker is essential and Google apps are next on the list.

Pebble drop Tasker

 

Pebble want to control what information you’re allowed to see on your watch, and they want to control it all through their app.  Had I wanted such strict control I’d have bought an iPhone!  My phone is Android.  Android is open source.  Not restricted.  The app doesn’t even have a tick/untick box, warning “Tasker / Google Now may result in repeated notifications”.

The thing is, Tasker brings functionality to the watch that Pebble themselves haven’t been able to do.  With its plugins and 3rd party apps integrating with Tasker it means you can do so much more than the already comprehensive app is capable of.  As Pebble want to restrict which apps they’ll allow you to use they’re putting nails in their own coffin.  If they’re not careful these sorts of decisions will do to their watch what Blackberry and Nokia did to their phones.

A year ago, Pebble were already facing criticism for blatant favouring of the iPhone over Android.  Even at the bottom of the box showed where Pebble’s alliance lay:

Pebble Box (under) highlighted

Pebble have faced criticism for not using colour screens or implementing touch screen functionality, especially in their Pebble Steel.  By denying access to certain apps and restricting functionality, even their supporters in the Android community will start to jump ship.

What annoys me is that there weren’t any “This app will no longer be supported as of 31/12/14” notifications.  Not even “This app is no longer supported”.  If a company behind smartwatches can’t send a notification to their own product then perhaps they should consider removing the prefix ‘smart’.

However, all may not be lost.  Recently Pebble announced their app can interact with Android Wear.  The Android Wear app doesn’t even need to be connected to the app or signed in to any account.  The only requirement is that it be installed.  Time will no doubt tell whether this restores what Pebble saw fit to block.  With a little good fortune I won’t be Pebble throwing any time soon.

Weaker passwords

So many web sites, so many passwords.  Unless you’re willing to risk using fewer than ten (or possibly only one) password for every site you use, you probably have the browser save the passwords and use a random password generator.

There are a number of apps which will generate passwords for you.  You can set the password strength and it will give you a unique password each time you ask for one.  If you’re hoping to get the same one twice, you’re probably going to die before it happens.  The apps give you nice, strong passwords.  Other apps will save the details for you, password keepers.

It’s not often, but from time to time I’ll come across a site which doesn’t allow the 40-50 digit passwords I tend to use.  Sometimes I’ll add a more, sometimes take a few off.  When I exit the app, the contents of the phone’s clipboard are sent to the PC.  From there I’ll often drop the password in to a .txt file and save it in Spideroak.  For those who don’t know, Spideroak is much like Dropbox but is fully secure, only decrypting the contents at the user’s device.

For the first time I’ve come across a web site which not only limits the length of the password, but doesn’t allow most of the special characters (for example !£$%^&*{[]}@’#~<>?/`¬\|etc.).  Eon Energy only allow the basic 0-9, A-Z, – and _.  For the first time since using password generators I’ve been effectively told my password is too strong, please use a weaker password, twice!

We’re living in a world where everyone is using stronger and stronger passwords.  Those with Microsoft qualifications need at least two special characters in their lengthy passwords.  Google, Twitter and Dropbox are amongst many sites using 2-step security, requiring a password and a code either generated by / sent to your phone.  These sites don’t require payments or personal information to use them, but they still offer 2-step security.

I didn’t sign up with Eon.  I was tempted to type in ‘password’, but in the end I was afraid it would be accepted.
Eon - too longEon - invalid format

Evolution of notifications

I’ve had smartphones ever since the Nokia N-Gage was released and I’ve grown accustomed to notifications changing. It started with things like Bluetooth being turned on, new SMS text messages and missed calls, something not unexpected on a telephone.

Symbian S60 changed to v2, v3, v3/v5 and v5 before it was retired. Icons and symbols associated with telephone function have since changed to include tweets, weather forecasts, RSS feeds, choice of keyboards and various other apps.

I now get reminded to take my medication or to take out the bin, as well as more personal notifications such as the computer has finished whatever task it was set or the dishwasher has finished its cycle.

Of course nowadays our notifications are branching away from our phone screens to Google Glass, Android Wear smartwatches, or the more battery friendly Pebble.
We can acknowledge or even respond to our information with the blink of an eye or a flick of our wrist.

So much information is at our fingertips we’re now the weak link in the chain. We can’t possibly process everything that comes our way. The notifications for it all would be overwhelming. So as we bring more and more information to our attention with services like IFTTT and apps like Tasker, we set up customisable conditional events to only show something of we’re at home or something else if we’re at work but only if the outdoor temperature drops below a given temperature or above a given humidity level; send a photograph to Twitter, Instagram or Facebook if we use a certain app, or change our wallpaper every day to match NASA’s photo of the day.

We are now at a stage where we need these systems in place, picking apps allowed to show us relevant notifications like a VIP list and banning others (especially those spamming us with pop up adverts). In the last decade notifications have evolved so much I can’t help but wonder where we’ll be in ten years time, and perhaps more importantly how we’ll be notified.

Pebble with iphones

I’ve been asked for advice on the Pebble watch – how to make it vibrate every half hour. Ordinarily it wouldn’t be an issue, Tasker would control it with a dynamic recurring 30 minute timer when in a certain geofenced area, with either AutoPebble or Pebble Notifier bridging Tasker to the Pebble app.
Unfortunately the person needing the recurring alert isn’t using Android. They have an iphone.

I’ve avoided using them whenever possible. Each exception has reaffirmed my decision to steer well clear. Unfortunately not everyone does the same.

I’ve looked into Tasker alternatives for iOS but frankly they’re laughable.

If you use iOS and know of a way to have it alert someone every half hour, please tweet me.
Thanks.

Two phones, one Pebble

I’d been in the market for a new watch for some time.  I looked at three watches – Samsung’s Galaxy Gear, the Pebble, and Sony’s Smartwatch 2.  I’ve used Sony’s LiveView watch before and it promptly joined a long list of Sony’s products that have either acted up, not worked or broke.  While a colour, touch screen watch might be nice I wanted something that I wouldn’t regret and that didn’t fit Sony’s bill.  The Galaxy Gear is an impressive enough watch but funds wouldn’t stretch that far and I knew the Pebble would integrate nicely with apps I already use, especially if I was to have notifications pushed to the watch from more than one phone.

Whether you have two phones because you need to carry a business phone, or you have a family member whose needs necessitate a separate emergency phone, it’s possible to have your Pebble receive notifications on multiple devices.  First of all, you’re going to need a few apps.

Anything you can do with both Pebble Notifier and PebbleTasker can be done in AutoPebble.  It’s a single app, cheaper, does far far more than what is shown below, but it is slower to respond and takes longer to learn how to use. If you want to quickly read and respond to a text I’d recommend using Pebble Notifier and PebbleTasker. This doesn’t mean you shouldn’t buy AutoPebble at all.  If you have the time to spend setting it up, do so.  It’s much quicker to set up if you want to set up lots of options in one go.  It certainly doesn’t disappoint.

Some of the above apps aren’t free but they’re not going to break the bank.  I spent under £8, and the apps can be used for more than one purpose.  I’m assuming you’ve never seen the above apps before.

First of all, set up Tasker.  You need to access the menu, Preferences, Misc, and tick Allow External Access.
Tasker-Menu
In AutoRemote, you need to authenticate the two devices.  For this you can either tap the phone icon, and type in the goo.gl/XXXXX code or just use the barcode scanner.
AutoRemote-FourQnet
Once AutoRemote is authenticated you can start setting up the profiles and tasks in Tasker.
Let’s assume you have your Pebble connected to your personal phone and you want to bridge your business phone to it.

On the business phone:

  1. Enter Tasker
  2. Click on the + icon at the bottom, [you may be prompted to enter a name, if so call it Texts], and tap the tick
  3. Event, Phone, Received Text [you can set restrictions on the texts here by entering parameters phone numbers or words in the text; if you want all texts forwarded then leave it blank and tap the back arrow at the top left]
  4. Tasker will now prompt you for a Task to perform when you receive a text. Click New Task, type in Texts, tap the tick and you’re ready to add the Task.
  5. Tap + Net, Mobile Data, On.  Then + Plugin, AutoRemote Message, then the pencil icon found to the right of Configuration.
  6. From here select the device you want to send it to, and in Message, enter “Business text from %SMSRN at %SMSRT, %SMSRB” (without the quotation marks) and tap your phone’s back button.

On your personal phone:

  1. Enter Tasker and add a profile, State, Plugin, AutoRemote, Configuration, and tick Event Behaviour.
  2. In Message Filter enter “Business text from” (without the quotation marks), and tick Case Insensitive.  [This shouldn’t make any difference if you’re careful but I’ve had the first letter of a word change case because I’ve went back to change it]. Press back a couple of times and type in a name for the new task.
  3. Add, Plugin, Pebble Notifier (not Pebble Notifier settings), Configuration, Body and type “%armessage” (this should be in lower case and again, without the quotation marks).  In the Title, type “Business SMS”.

That’s it. All the time both phones are connected to the net your texts should be pushed from one phone, to another and on to your Pebble.  In most cases this is enough, but there are always times when you want two way communication.  This takes a little more time, but not too much.

If you’re unable to take out your phone and respond to a text properly there’s a good chance you’re going to want to keep things simple.  Your responses need to be set up in advance.  I have set up:

  • Ok
  • Yes
  • No
  • Thanks
  • I’m busy at the moment, I’ll get back to you shortly.

Obviously you’re able to select whatever responses are suitable for your own life, just don’t forget which one’s which.
On the business phone set up a profile, I’ve called mine “AR SMS Ok”.

  1. Add, State, Plugin, AutoRemote,
  2. Tap the Configuration pencil and tick Event Behaviour
  3. In Message Filter, type in “Pebble Reply Ok”
  4. Tick Case Insensitive and Exact Message
  5. Tasker will then prompt you for a task, select New Task, enter “AR SMS Ok” and tap the tick.
  6. In Number, enter “%SMSRF”
  7. In Message, type “Ok”, and decide whether or not you want the text to be stored with your other texts.
  8. [In case you accidentally reply to a tweet, you might want to add If %SMSRN doesn’t match 86444 (Twitter’s phone number)]

You’ll need to do the above for each response you’d like to have available in the Pebble.  I’d be wary of cloning the profiles as it won’t change the task assigned to it, and you won’t get the experience.  Once they’re all done, return to your personal phone.  Add a new Task, I called it ‘Pebble (phone model) SMS’.
Add, Task, Wait, 3 seconds.
Add Plugin, PebbleTasker, Configuration.
The top task, I assigned ‘Reply OK’ with the long press ‘Reply Yes’. Close watch app on use.
The middle, ‘Reply Busy’. Close watch app on use.
The bottom ‘Reply Thanks’ and the long press ‘Reply No’. Close watch app on use.
Close on idle, Reset on idle were ticked and the app should Open Watch App so the options are loaded for you without having to go through the Pebble’s menu.

Obviously you can have the remote phone confirm the messages have been sent by having AutoRemote send a message to the personal phone and having Pebble displaying it.  It just depends on what your personal requirements are.

It’s worth noting that once you’ve bought Tasker and AutoRemote you can do any number of things.  Making your PC interact with your phone, and by extension, your Pebble is easily doable.  You can sleep, shutdown, restart, lock, mute etc. a PC by pressing a few buttons on the Pebble.  If you like, you can even be notified when your child is using their phone/PC, and which apps they’re using.  Not to mention getting their location, locking/unlocking the device, opening/closing apps or having messages pop up on their screen.  In no way do I condone using these apps for April Fools pranks.  I would never do that.  Ever.  Well, perhaps one or two.

Automation

We’re only here for a finite time.  That time is precious.  We spend far too much wasted time checking up on things to see if there’s anything new.  That’s why we automate things, to save time and effort.

We all have automated devices, even if we don’t look at them that way.  Washing machines, dishwashers, apps on mobile phones.  We don’t want to waste time checking our phone all day, so we use notifications.  We don’t want to wash our clothes or dishes ourselves, so we use washing machines and dishwashers to do the work for us.  The question is, where do we draw the line?  With houses, offices, servers, PC’s, smartphones, vacuum cleaners and even cars being automated the line keeps moving.

For me, my line is drawn far away from most people’s.  I take things a step further, I like automation.

I use automation tools on my phone, computer, tablet, watch etc.  I like the fact that my computer knows how long the dishwasher takes and turns it off at the right time, sends a message to my phone which in turn forwards that message to my watch to let me know when to open the dishwasher door, just so the crockery dries itself.  I like the lights turning themselves on when it gets dark.  I have NFC stickers throughout my house which enable the phone to perform various tasks.  I like that my calls and texts are automatically backed up to my Google account for me, so I can keep track of who I called, who called me, and when.  I love smart notifications, apps you can configure to link obscure items to your phone or tablet.  Don’t get me wrong, I’m not saying I’m getting overloaded with messages all day long.  This is simply about having the right information at the right time. This then enables me to disregard or act upon what I receive.

So, how can you set things up?  First of all decide on what you want automated and why.  My own inspiration was the Orange Automated Home which featured in their magazine, boasting levels of technology which at the time was admirable.  Since then a number of high tech, fully automated homes have been featured as newer technology is developed.   Since reading the article I wanted to own my very own automated home. Building Management Systems are now used to automate offices across the globe.  The thing is, once you start automating things you get the experience and imagination to automate so much more.  You end up looking for ways to help you.  

I currently use Homeseer to run the house, an automated alarm system to keep it secure.  The PC’s have EventGhost with the AutoRemote plugin for two way notification and control.  This allows me to be notified on my phone/tablet when the computer does something I want to be told about without having to sit at the computer.  [This is particularly useful if you have kids with their own (albeit really old) computer.]  Our smartphones use NFC, Tasker, Secure Settings, AutoRemote and Pushover to perform multiple functions with little or no input. [Useful if your bairns use your old phone].  Finally my watch links to the phone so that the most important information is brought to my attention without the need to keep taking out the phone.  Because of the way all these things link together I only have to look at my watch to know the PC or the house has done something on my behalf.  Web sites, files and even clipboard contents can be pushed from the phone to the PC (and vice versa).  I know if my son has my old phone turned on or not, whether he’s playing games or reading ebooks on the Kindle app, and we can lock / unlock / track / take photos / reboot the phone remotely.

One web site that really helps is IFTTT (If This Then That).  It works on logic principles, if (for example you get an email) then do (insert action here) for me automatically.  I use IFTTT when awaiting deliveries (amongst other things) to keep me up to date by using smart notifications on my phone by linking the tracking number to Pushover.  I don’t have to keep checking the tracking web site on the off chance that something had happened, I’m not wasting time. There are all sorts of ways IFTTT can help you.  If it’s going to rain that day you can have the weather report sent to your phone before you wake up.  You get the idea.

If you’d like to know more about automation, please feel free to comment below or get in touch.

Links:
Home automation hardware
Smartphone automation – Android
NFC tags